|
|
|
BioDrive - BHD 35A
Description
- Uses chip based sensor for live-scan capturing of
3D-fingerprint minutiae.
- Fingerprint identification with high accuracy and speed.
- Hard-drive is hidden until positive fingerprint
authentication, for security purpose.
- NIST Certified 100% hardware Cipher Engine
- (i.e. access
to data in the hard-disk is protected by encryption
technology).
- High-speed USB 2.0 interface transferring data at up to
480Mbit/sec.
- Windows 98/ ME/XP/2000 supported.
Features
-
Effectively detects fingerprints with scars, cuts,
swelling, and fingers that are too dry or wet.
-
Firmware automatically ignores residual fingerprints.
-
Scratch resistant sensor withstands ESD 20KV.
-
Effective fingerprint recognition technology by a
combination of 1:1 and 1:N Matching mechanism.
-
No installation of driver is required (except Windows
98).
-
“Real-time” encryption of the entire hard disk
(including boot sector and operating system) at 1.6Gbit/sec
using TDES algorithms.
-
Encryption key lengths vary from
40-bit to 192-bit.
-
Compatible with Ultra ATA 66/100/133.
Specifications
| |
BHD35A (3.5") |
| Hardware Interface |
USB 2.0 (480Mbit/sec) |
| Hard Disk Spec |
3.5”, Ultra ATA 66/100/133 |
| Sensor |
Semiconductor Sensor |
| Resolution |
508 DPI |
| Field Size |
236X192 pixels |
| Gray Level |
256 levels (8 bits/pixel) |
| Chip Size |
12.8mm * 10 mm |
| False Rejection Rate (FRR) |
1/1,000 |
| False Acceptance Rate (FAR) |
1/1,000,000 |
| Allowable Rotation |
± 15° |
| ESD |
18~20kv |
| Scanning Speed |
< 1 second |
| Matching Speed |
< 10ms |
| Dimension |
20(H) ×4.5(W) ×11(D) cm |
| Weight |
454.5 gm |
| Temp |
-40°C ~ 70°C |
| Encryption Speed |
1.6Gbit/sec |
| DES Key bits |
40 – 192 bits |
| MMI(Man mgmt interface) |
2 DUO-LED'S red/green |
|